Shopping Cart
Shopping Cart:  0  items
Total: $0.00

Hydrogen Kit for Large Commercial Engines

$2,979.00

Dry Cell Kit For Truck Engines of 10 To 20 Liters

We are taking center stage with our commercial line of hydrogen assist systems. Slowly but surely many large fleet operators are being pleasantly rewarded with their investment into our systems and the resulting benefits.

This is the system to use for all long haul tractors (semis), most commercial fishing boats and generators up to 20 liters of engine displacement .

We have designed this kit so you will receive all the parts needed to have a successful Hydrogen Assist system installation for any engine in this class.

Each of our systems comes with a PWM and LCD controller and display. These systems are used to properly control the entire system, and also will show the driver what is going on with the cell and system at any time.

This model is heavy duty all the way with electronics, tanks, hose and hardware to make you confident with your application. Perfect for gasoline (petrol) as well as all diesel engines. 

We designed this unit with 12 inch plates for heavy duty applications. By heavy duty we mean high levels of HHO output, but also very long duty life for commercial applications. The stainless plates are 16 gauge stainless steel, and the unit weighs well over 50 pounds when installed.

And for commercial applications, the tank is 2.5 gallons, not quarts, along with our multi-cartridge dryer system to keep your equipment running efficiently and safely.

Its baseline production is 4 liters per minute. You can see there is plenty of room to increase output, but also recognize this is easily enough for engines up to 16 liters.

Large tractor trailers usually have engines larger than 9 liters, and usually between 12 and 14 liters. The ES-16 is a long lasting unit that can run at 100 amps as needed, but usually only requires less than 30 amps (@12 volts) to do its job.

We also pair it with our custom 100-amp power controller that is virtually maintenance free. Set the desired current draw, and you can run this unit 24 hours, 7 days a week. This unit can be specified for 24 volt systems for no extra cost. Please contact us for more information.

Sales@ReliantFuelSystems.com


 INTEL Hydrogen Injection


 

This kit includes:

  1. 1 x Double Stack 12" x 12" x 5" HHO Dry Cell Generator (13 plates). This cell weighs 29 lbs without electrolyte.
  2. Pulse-Width Modulator (PWM). Our PWM comes with a remote display unit that you can mount in the passenger compartment that will show you your amp draw, pulse frequency, and duty cycle (the percentage of the time that the voltage is high vs the time the voltage is low during each pulse).
  3. Electronic Enhancer needed for your vehicle.
  4. 2.5 Gallon electrolyte reservoir with cap and fittings.
  5. Advanced Dryer Assembly
  6. 25' of heavy-duty 3/8" hose.
  7. 25' each of red and black 4 gauge wire.
  8. System installation kit: Includes all the connectors, screws, drain valve, etc that you need to complete a full installation of your system

Add to Cart:

  • Model: Large Commercial ES-32
  • Shipping Weight: 62lbs
  • 10 Units in Stock


This product was added to our catalog on Thursday 11 October, 2012.